Accessories

• Start Dead Batteries – Safely jump start a dead battery in seconds with this compact, yet powerful, 1000-amp portable lithium car battery jump starter pack – up to 20 jump starts on a single charge – and rated for gasoline engines up to 6 liters and diesel engines up to 3 liters.
• UltraSafe – Safe and easy to use car battery jump starter pack without the worry of incorrect connections or sparks. Safely connect to any 12-volt automotive car battery with our mistake-proof design featuring spark-proof technology and reverse polarity protection.
• Multi-Function – It’s a car jump starter, portable power bank, and LED flashlight. Recharge smartphones, tablets, and other USB devices. It’s easily rechargeable from any powered USB port in 3 hours at 2.1-amps. Plus, an integrated 100-lumen LED flashlight with seven light modes, including emergency strobe and SOS.
• Advanced Design – Our most advanced portable car battery jump starter ever. Featuring high-discharge lithium technology for safe operation in any climate. A rugged and water-resistant enclosure rated at IP65. A rubberized over-molded casing to prevent scratching or marring of surfaces. And an ultra-compact and lightweight design weighing just 2.4 pounds.
• In The Box – GB40 UltraSafe Portable Lithium Car Battery Jump Starter Pack, Heavy-Duty Battery Clamps, 12-Volt Car Charger, Micro USB Charging Cable, Microfiber Storage Bag, User Guide, 1-Year Warranty, and Designed in the USA.

• Start Dead Batteries – Safely jump start a dead car battery in seconds with this compact, yet powerful, 3000-amp portable lithium car battery jump starter pack – up to 40 jump starts on a single charge – and rated for gasoline and diesel engines up to 10 liters.
• UltraSafe – Safe and easy to use car battery jump starter pack without the worry of incorrect connections or sparks. Safely connect to any 12-volt automotive car battery with our mistake-proof design featuring spark-proof technology and reverse polarity protection.
• Multi-Function – It’s a car jump starter, portable power bank, LED flashlight, and 12-volt portable power. Recharge smartphones, tablets, and other USB devices. It’s easily rechargeable from any powered USB port in 6 hours at 2.1-amps. An integrated 500-lumen LED flashlight with seven light modes, including emergency strobe and SOS. Plus, a 12-volt, 15-amp outport port for powering any 12VDC devices, like tire inflators, inverters and more.
• Advanced Design – Our most advanced portable car battery jump starter ever. Featuring high-discharge lithium technology for safe operation in any climate. A rugged and water-resistant enclosure rated at IP65. A rubberized over-molded casing to prevent scratching or marring of surfaces. Allows rapid charging in 2-hours via the vehicles auxiliary port. And an ultra-compact and lightweight design weighing just 7.5 pounds.
• Note: Product dimensions may slightly differs. In The Box – GB150 UltraSafe Portable Lithium Car Battery Jump Starter Pack, Needle-Nose Battery Clamps, XGC Male and Female Connectors, XGC Cable, Micro USB Charging Cable, Microfiber Storage Bag, User Guide, 1-Year Warranty, and Designed in the USA.

DWX-52D Specifications
Cuttable material Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum, Glass fiber reinforced resin, Chrome Cobalt sintered metal
Loadable workpiece shape External Diameter 98.5 mm
Max Height 60 mm
Step 10 mm
Pin Type Diameter 6 mm
Loadable workpiece weight Up to 850 g
Number of adapters housed 6
Operating speed XYZ axis: 6 to 1,800 mm/min. (0.24 to 70.9 in./min.)
Spindle motor Brushless DC Motor
Spindle speed 6,000 to 30,000 rpm
Rotary axis travel angle A axis ±360°
B axis ±30°
Number of burs housed 15
Attachable bur Shank diameter 4 mm
Length 40-55 mm
Compatible compressed air 0.05/0.2 MPa (Automatic switch)
Interface USB
Control command set RML-1, NC code
Power requirements AC 100 V to 240 V ±10%, 50/60 Hz, 2.0 A (overvoltage category II, IEC60664-1)
Power consumption Approximately 200 W
Operating noise During operation 70 dB(A) or less (when not cutting)
During standby 45 dB(A) or less
External dimensions Width 19.5 in (495 mm)
Depth
26.0 in (660 mm)
Height 23.6 in (600 mm)
Weight 147.7 lbs. (67 kg)
Installation environment Altitude Up to 6,562 ft. (2,000m)
Temperature 41 to 104 °F
5 to 40°C
Humidity 35 to 80% (no condensation)
Ambient pollution degree 2 (as specified by IEC 60664-1)
Short-term temporary overvoltage 1,440 V
Long-term temporary overvoltage 490 V
Included items Power cord, power plug adapter, USB cable, manuals, Roland DG software package CD, detection pin, automatic correction jig, pin-type material adapter, hexagonal driver, spanner, milling bur holders, milling bur positioner, dust collection hoses, dust collection hose adapter, regulator, cleaning tool, option adapter labels, material adapters, material adapter rack
Operating system Windows® 7/8/8.1/10 (32 or 64 bit)
USB cable Use the included USB cable